Purpose: Preparation of liquid dosage forms. Preparation of pharmaceutical syrups and suspensions
Specifications:
- Internal surface finish Ra ≤ 0.63 μm, polished
- External surface finish Ra ≤ 0.8 μm, ground
- Finish welded seams Ra ≤ 1.6 μm, ground
- Working volume of the reactor chamber, l 2000
- Operating temperature in the reactor, ° С 20 - 110
- Operating temperature in the reactor jacket, ° С 8 - 133.53 Tank
- type (vertical, horizontal) Vertical
- Bottom shape (conical, elliptical, flat with an inclination) Elliptical
- Lid shape Elliptical
- The presence of a stirring mechanism So
- Type of low-speed stirring device Anchor (without fluoroplastic scrapers)
- Type of high-speed mixing device Rotary-blade 2 Rivne with identical rotors
- Placement of stirring mechanisms on the cover:
- anchor stirrer - in the center
- rotor paddle - on the side Upper
- Rotary-blade mixer two-level (two identical rotors) with a speed controller, rpm 10-250
- Rotation frequency of an anchor stirrer without fluoroplastic scrapers, rpm 10- 60
- Cooling of stirrer motors So
- Presence of a heating / cooling jacket So
- Cooling agent Cold water, P = 0.3 MPa
- Heating agent Steam, P = 0.3 MPa, limited by the RID-regulator and a safety valve at the inlet
- Operating pressure in the housing, bar (MPa) - 0.7 ÷ 2.0 (-0.07 + 0.2)